Skip to main content

Procedure for Receipt and Issuance of Endotoxin testing Materials and testing of Endotoxins in Finished Product

Take the sample (product diluted to 2-fold of MVD) 50?l each in endotoxin free tubes by micropipette fitted with disposable tip. Keep all the sets in duplicate for product positive and product negative. Add 50?l of reconstituted Control Standard Endotoxin diluted to 2? in positive tubes and 50?l of LAL reagent water in negative tubes. Add 100 ?l of reconstituted LAL reagent to each test tube in turn starting with negative control.
Once prepared shake the rack of tubes to ensure mixing of the sample and lysate. Insert the tubes in heating block for incubation at 37°C + 1 for a period of 60 minutes. After incubation remove the test tubes and invert smoothly and note down the result as positive or negative. A positive test is defined as a firm clot that maintains its integrity upon inversion. Rest of the result considers as negative.
Microbiology, Procedure, Endotoxin testing Materials, Endotoxins in Finished Product



Comments

Popular posts from this blog

OFLOTAL - OR

Ofloxacin - 200mg + Orinidazole-500mg, Model of pack:10x10's, Packing:BlisterOfloxacin - 200mg + Orinidazole-500mg, OFLOTAL - OR TABLETS

Table of contents (toc) for republic of uzbekistan

Table of contents for dossier requirments (republic of uzbekistan). Toc for republic of uzbekistan , toc formate for dossier

Preparation of mercuric acetate solution 10 percent

Pour about 75 ml of Glacial Acetic Acid into a 250 ml capacity beaker. Weigh 10.0 grams of Mercuric Acetate LR and transfer slowly, into above-said beaker, though it‘s sidewalls, while gentle mixing by using a glass rod. Transfer prepared solution into a 100 ml volumetric flask, by using a glass funnel. Rinse the beaker and funnel with few ml of Glacial Acetic Acid, and allow to add into the contents of volumetric flask. Make up the volumetric flask to mark with Glacial Acetic Acid , remove the funnel, keep the lid to close the volumetric flask and shake gently to mix the solution. Transfer the prepared solution into a suitable container and label with all necessary details. The resultant solution is having the concentration of 10.0% w/v. Mercuric Acetate , Glacial Acetic Acid , Glass funnel, Volumetric flask