Skip to main content

Procedure For Operation And Calibration Of MAS 100 Air Sampler

Place the MAS –100 Air Sampler on a firm support. Press “ YES” to turn ON the MAS –100. After power – on, the MAS –100 displays the software with the current battery charge, followed by the most recent aspirated volume.
Check the instrument battery. When the power unit is connected and the MAS –100 is in “Sleep Mode”, “Battery Charging” appears in the display and the red LED lights. Once the battery is fully charged it appears “Battery OK”. Open the perforated lid (With attached dust cover) by rotating to the right.
Microbiology, Procedure, Operation, Calibration, Air Sampler


Comments

Popular posts from this blog

OFLOTAL - OR

Ofloxacin - 200mg + Orinidazole-500mg, Model of pack:10x10's, Packing:BlisterOfloxacin - 200mg + Orinidazole-500mg, OFLOTAL - OR TABLETS

Table of contents (toc) for republic of uzbekistan

Table of contents for dossier requirments (republic of uzbekistan). Toc for republic of uzbekistan , toc formate for dossier

Preparation of mercuric acetate solution 10 percent

Pour about 75 ml of Glacial Acetic Acid into a 250 ml capacity beaker. Weigh 10.0 grams of Mercuric Acetate LR and transfer slowly, into above-said beaker, though it‘s sidewalls, while gentle mixing by using a glass rod. Transfer prepared solution into a 100 ml volumetric flask, by using a glass funnel. Rinse the beaker and funnel with few ml of Glacial Acetic Acid, and allow to add into the contents of volumetric flask. Make up the volumetric flask to mark with Glacial Acetic Acid , remove the funnel, keep the lid to close the volumetric flask and shake gently to mix the solution. Transfer the prepared solution into a suitable container and label with all necessary details. The resultant solution is having the concentration of 10.0% w/v. Mercuric Acetate , Glacial Acetic Acid , Glass funnel, Volumetric flask