Check the water level before starting the autoclave. If the level is down, then add purified water up to the level mark. Open the door at non-sterile area and load the necessary items to be sterilized as per Appendix – I / appendix –II as required.
Place the autoclave indicator strips at different places in the autoclave for each cycle to indicate the proper sterilization by color differentiation of the strip. Close the door using the radial locking handles clockwise till it is tight. Set the thermograph recorder. Switch on the system to record the temperature cum time of each cycle.
Switch on the mains to supply t
he power followed by the toggle switch located in the control panel to activate the heat generator. Set the multi port-operating valve in slow exhaust position and allow the steam to build in the outer jacket till the pressure reaches 14-17 PSI.
Operation, Cleaning, Calibration, Double Door Autoclave, Microbiology
Place the autoclave indicator strips at different places in the autoclave for each cycle to indicate the proper sterilization by color differentiation of the strip. Close the door using the radial locking handles clockwise till it is tight. Set the thermograph recorder. Switch on the system to record the temperature cum time of each cycle.
Switch on the mains to supply t
he power followed by the toggle switch located in the control panel to activate the heat generator. Set the multi port-operating valve in slow exhaust position and allow the steam to build in the outer jacket till the pressure reaches 14-17 PSI.
Operation, Cleaning, Calibration, Double Door Autoclave, Microbiology
Comments
Post a Comment