Procedure For Returnable Material Outward And Inward Entries At Security

PROCEDURE
Procedure for Outward Material Entries
As soon as the material accompanied by the returnable gate pass reach the security office the A.S.O. on duty shall check ensure the consignment as per documents as follows-
Description of the material
Quantity of the material
Whether the consignment signed by the authorised person.
Security shall inspect the consignment and ensure only the material pertaining to the document received is present.
In case of any discrepancy security shall contact Human Resource dept. and Warehouse to resolve the issue.
Upon resolving the issue security shall make outward entries as per formatxxxxx.
In charge security shall stamp the outward documents as per format xxxxx
Security in-charge shall instruct the guard to allow the material out.
Procedure for Inward Material Entries
On receipt of the material which has gone on returnable gate pass the documents shall be sent to concerned warehouse, on confirmation from warehouse the security shall check the consignment as follows.
The material received is checked as per the returnable gate pass and ensure the same material returned.
In case of any discrepancy security shall contact Human Resource dept. and Warehouse to resolve the issue.
After resolving issue security shall make inward entry as per format no. xxxxx
Security shall mark inward stamp on the returnable gate pass as per xxxxx
Returnable, Material, Outward, Inward, Security

Comments

Preparation of barium chloride solution

Pour about 75 ml of Distilled water into a 250 ml capacity beaker. Weigh 10.0 grams of Barium Chloride LR and transfer slowly, into above said beaker, through it‘s side walls, while gentle mixing, by using a glass rod. Transfer prepared solution into a 100 ml volumetric flask, by using a glass funnel. Rinse the beaker and funnel with few ml of Distilled water, and allow to add into the contents of volumetric flask. Make up the volumetric flask to mark with Distilled water, remove the funnel, keep the lid to close the volumetric flask and shake gently to mix the solution. Transfer the prepared solution into a suitable container and label with all necessary details. The resultant solution is having the concentration of 10.0% w/v. Barium Chloride , Distilled water, Glass rod, Glass funnel, Calibrated Analytical Balance

Procedure for Collection Transfer and Disposal of Scrap

Scrap essentially consists of metal scrap (MS, SS, Aluminum etc.) arising from engineering fabrication work and fiber drums, HDPE drums, carboys and polythene covers etc. from raw material packaging.Collection of Scrap: Scrap collection points are identified at the following locations. Scrap arising are placed in the above collection points. Scrap from these points are periodically shifted to scrap disposal yard outside Scrap segregation is done at disposal yard – namely as MS, SS, Aluminum, HDPE drums, carboys, fiber drums, polyethylene bags and cardboard cartons. Scrap is disposed from the disposal yard. Collection , Transfer, Disposal of Scrap, segregation

PREPARATION OF SILVER NITRATE SOLUTION (5 percent )

Pour about 75 ml of Distilled water into a 250 ml capacity beaker. Weigh 5.0 grams of Silver Nitrate LR and transfer slowly, into above-said beaker, through its sidewalls, while gentle mixing by using a glass rod. Transfer prepared solution into a 100 ml volumetric flask, by using a glass funnel. Rinse the beaker and funnel with few ml of Distilled water, and allow to add into the contents of volumetric flask. Make up the volumetric flask to mark with Distilled water, remove the funnel, keep the lid to close the volumetric flask and shake gently to mix the solution. Transfer the prepared solution into a suitable container and label with all necessary details. The resultant solution is having the concentration of 5.0% w/v. Silver Nitrate , Glass funnel, Beaker, Distilled water , Glass rod

ICHAPPS

Search This Blog