Skip to main content

Procedure for Operating and Maintenance of Weigh Bridge

Operating Procedure : Bulk inward and outward materials like solvents, coal and scrap etc. shall be weighed using the weighbridge located opposite to the existing gate of the site. Concerned warehouse person should be present while weighing the vehicle for cross checking the weights.
During the entry to the plant the gross weight shall be recorded and during exit the tare weight shall be recorded to get the net weight. If the empty vehicle is arrived for loading first tare weight will be recorded, and the loaded vehicle will be weighed again to obtain the gross weight that will be recorded to get the net weight. Weighment entries shall be issued to the warehouse section by Human Resource.
Details of vehicles and their corresponding gross, tare and net weights along with the vehicle number and name of the item shall be recorded in a register maintained for the purpose.Procedure for Maintenance of Weigh Bridge : The weighbridge shall undergo an annual certification procedure by the Office of the Controller of Legal Metrology. Human Resource shall ensure timely execution.
Periodic maintenance and recalibration during emergency shall be contacted to external agency. Periodic maintenance and recalibration contracts documents shall be maintained by Human Resource. In case of breakdown A.M.C. personnel will come and rectify the snag. During this period of rectification vehicles will be sent for weighment to outside agencies.
Procedure, Operating, Weigh Bridge, Administration


Comments

Popular posts from this blog

OFLOTAL - OR

Ofloxacin - 200mg + Orinidazole-500mg, Model of pack:10x10's, Packing:BlisterOfloxacin - 200mg + Orinidazole-500mg, OFLOTAL - OR TABLETS

Table of contents (toc) for republic of uzbekistan

Table of contents for dossier requirments (republic of uzbekistan). Toc for republic of uzbekistan , toc formate for dossier

Preparation of mercuric acetate solution 10 percent

Pour about 75 ml of Glacial Acetic Acid into a 250 ml capacity beaker. Weigh 10.0 grams of Mercuric Acetate LR and transfer slowly, into above-said beaker, though it‘s sidewalls, while gentle mixing by using a glass rod. Transfer prepared solution into a 100 ml volumetric flask, by using a glass funnel. Rinse the beaker and funnel with few ml of Glacial Acetic Acid, and allow to add into the contents of volumetric flask. Make up the volumetric flask to mark with Glacial Acetic Acid , remove the funnel, keep the lid to close the volumetric flask and shake gently to mix the solution. Transfer the prepared solution into a suitable container and label with all necessary details. The resultant solution is having the concentration of 10.0% w/v. Mercuric Acetate , Glacial Acetic Acid , Glass funnel, Volumetric flask