Skip to main content

preparation of acetic acid 10 percent

Measure 48.0 ml of Glacial Acetic Acid LR and transfer into a 100 ml capacity beaker. Pour about 200 ml of distilled water into a 500 ml capacity beaker. Transfer slowly, through sidewalls of the beaker, 48.0 ml of Glacial Acetic Acid LR (about 10ml on each attempt) into above said beaker, while gentle mixing, by using a glass rod.
Transfer prepared solution into a 500ml volumetric flask by using a glass funnel. Rinse the beakers and funnel with few ml of distilled water, and allow to add into the contents of volumetric flask.
Glacial Acetic Acid, Glass funnel, Beaker, Measuring cylinders, Distilled water
https://ichapps.com/qms/view/preparation-of-acetic-acid-10-percent


ich

Comments

Popular posts from this blog

Preparation of barium chloride solution

Pour about 75 ml of Distilled water into a 250 ml capacity beaker. Weigh 10.0 grams of Barium Chloride LR and transfer slowly, into above said beaker, through it‘s side walls, while gentle mixing, by using a glass rod. Transfer prepared solution into a 100 ml volumetric flask, by using a glass funnel. Rinse the beaker and funnel with few ml of Distilled water, and allow to add into the contents of volumetric flask. Make up the volumetric flask to mark with Distilled water, remove the funnel, keep the lid to close the volumetric flask and shake gently to mix the solution. Transfer the prepared solution into a suitable container and label with all necessary details. The resultant solution is having the concentration of 10.0% w/v. Barium Chloride , Distilled water, Glass rod, Glass funnel, Calibrated Analytical Balance

preparation of sodium hydroxide solution dilute

Pour about 75 ml of distilled water into a 250 ml capacity beaker. Weigh 5.0 grams of Sodium Hydroxide Pellets LR and transfer slowly, into above said beaker, through it‘s sidewalls, while gentle mixing by using a glass rod. Transfer prepared solution into a 100 ml volumetric flask by using a glass funnel. Rinse the beaker and funnel with few ml of distilled water, and allow to add into the contents of volumetric flask. Make up the volumetric flask to mark with distilled water, remove the funnel, keep the lid to close the volumetric flask and shake gently to mix the solution. Transfer the prepared solution into a suitable container and label with all necessary details. The resultant solution is having the concentration of 5.0% w/v. Sodium Hydroxide Pellets , glass funnel, sidewalls, glass rod

Operation of Gas Chromatograph

To lay down the procedure for operation of gas chromatograph (SHIMADZU GC-2010 with AOC-5000) system. Shimadzu gc system, gc-2010. Aoc 5000 headspace sampler and auto-injector. 3gc solution software. Ensure that the working bench and area is clean. Always ensure gas line pressure is maintained above 4kg/cm2 in all gas supply lines . Gas Chromatograph , tighten, injection , magnetic force