Calibration of Bubble Flow Meter

To lay down the procedure for calibration of bubble flow meter. This SOP is applicable for quality control department. Clean the bubble flow meter thoroughly with methanol and allow to dry. Close the end of the flexible tube of flow meter and fill it with water up to the 50 mL mark.
Take a 100 mL empty beaker and weigh it. Open the flexible tube slowly and collect the water in the 100 mL beaker, till the water level in the flow meter comes to zero.
Bubble Flow Meter, methanol, flexible tube, beaker
ich

Comments

OFLOTAL - OR

Ofloxacin - 200mg + Orinidazole-500mg, Model of pack:10x10's, Packing:BlisterOfloxacin - 200mg + Orinidazole-500mg, OFLOTAL - OR TABLETS

Procedure for Inward Material Entries at Security

As soon as a Raw / Packing material consignment arrives at the factory gate, security personnel shall confirm that the material Security shall confirm the place of delivery from the concerned warehouse. Security shall send the documents to the concerned warehouse. Upon receipt of the documents warehouse shall check and ensure the following: Material is for Purchase order exists for the supply. Whether the vendor is approved vendor or not. Certificate of Analysis is enclosed. Invoice / Delivery challan is enclosed. Packing list, if any Lorry Receipt, if any Relevant Excise documents, if any In case of any discrepancy, warehouse shall contact purchase department to resolve the issue. Upon resolving the issue, warehouse shall instruct the security department to allow the material to allow the material inside. Security shall enter the details in the concerned area material inward register as per format no. xxxxx Security shall put an inward stamp on the back side of the Invoice /...

CARBORIN Z

Carbonyl Iron-100mg+FolicAcid-0.5mg+B12-mcg+Zinc 61.8mg, Model of pack:5x3x10's, Packing:Blister Carbonyl Iron-100mg +FolicAcid-0.5mg+B12-mcg+Zinc 61.8mg, CARBORIN - Z CAPSULES

ICHAPPS

Search This Blog